BVS2 SERIES (BSPP/NPT/SAE/JIC)

Stainless steel two way high pressure ball valves

Holmbury’s BVS 2 Series two way stainless steel, high pressure ball valves are designed to suit a wide range of applications. These valves should not be used as flow control valves and should therefore always be fully open or closed.

FEATURES

Floating ball design maximises sealing
Full bore valves provide unrestricted flow path for negligible pressure drop
Open to close in 1/4 turn
Cranked handle allows clearance for easy operation. Handles can be replaced.

CONSTRUCTION

AISI 316 stainless steel
Fitted with Viton seals
Also available in carbon steel (See BVC 2 Series)
Metric and flanged available on request
Handle zinc alloy (stainless steel available on request)

ACCESSORIES

• Valve locking kits and valve handles are available
for the BVC2 Series

APPLICATIONS

Designed for usage in marine, offshore/onshore, pharmaceutical, power generation and offshore industries

AVAILABLE SEALS AND TEMPERATURE RANGE

All carbon steel products have Nitrile Butadiene Rubber seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) seals fitted as standard. Special seal materials available on request.

0⁰
0⁰

106⁰
223⁰F

NITRILE
VITON^®

-20⁰C
-4⁰F

120⁰C
248⁰F

EPDM
KALREZ^®

-25⁰C
-13⁰F

200⁰C
392⁰F

VITON^®
NITRILE

-40⁰C
-40⁰F

300⁰C
572⁰F

KALREZ^®
EPDM

-50⁰C
-58⁰F

ABBREVIATION	TRADE NAME	CHEMICAL NAME	MIN TEMP.	MAX TEMP.
NBR XNBR	Chemigum®, Hycar8, Breon®, Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol®	Nitrile Butadiene Rubber Carboxylated Nitrile Rubber	-40°C (-40°F)	106°C (223°F)
FKM (FPM)	Dai-el®, Fluorel®, Tecnoflon®, Viton®	Fluoro-elastomer Rubber	-20°C (-4°F)	200°C (392°F)
EPR EPDM	Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM®	Ethylene Propylene Copolymer Ethylene Propylene Terpolymer	-50°C (-58°F)	120°C (248°F)
FVMQ	Silastic 1S®, FSE®	Fluorosilicone Rubber	-65°C (-85°F)	170°C (338°F)
FFKM	Perlast®, Kalrez®, Chemraz®, Kaflon®	Perfluoroelastomer	-25°C (-13°F)	300°C (572°F)