VPS SERIES
Hose burst valves and cartridges
Creative’s VPC Series bidirectional hose burst valves allows free flow under normal working conditions. Flow will immediately cease in the event of a catastrophic hose failure. The burst flow can be set by increasing or decreasing the cartridge setting (dimension ‘S’).
• Can be retrofifitted to existing systems
• Male thread designed to be screwed into female
threaded port
• Valves need to be manually set to alter the flflow at
which the valve shuts
• Replacement cartridges are available for the
VPC Series
• Bidirectional flow
• Male thread designed to be screwed into female
threaded port
• Valves need to be manually set to alter the flflow at
which the valve shuts
• Replacement cartridges are available for the
VPC Series
• Bidirectional flow
- Carbon steel with trivalent plating
- Metal to metal sealing
- Not applicable
• Construction
• Lifting Equipment
• Mobile Hydraulics
• Test Equipment
• Machine Tools
• General Hydraulics
• Agricultural
• Lifting Equipment
• Mobile Hydraulics
• Test Equipment
• Machine Tools
• General Hydraulics
• Agricultural
AVAILABLE SEALS AND TEMPERATURE RANGE
All carbon steel products have Nitrile Butadiene Rubber seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) seals fitted as standard. Special seal materials available on request.
00
00
00
1060
2230F
NITRILE
VITON®
VITON®
-200C
-40F
1200C
2480F
2480F
EPDM
KALREZ®
-250C
-130F
-130F
2000C
3920F
3920F
VITON®
NITRILE
NITRILE
-400C
-400F
-400F
3000C
5720F
KALREZ®
EPDM
EPDM
-500C
-580F
-580F
| ABBREVIATION | TRADE NAME | CHEMICAL NAME | MIN TEMP. | MAX TEMP. |
|---|---|---|---|---|
| NBR XNBR | Chemigum®, Hycar8, Breon®, Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol® | Nitrile Butadiene Rubber Carboxylated Nitrile Rubber | -40°C (-40°F) | 106°C (223°F) |
| FKM (FPM) | Dai-el®, Fluorel®, Tecnoflon®, Viton® | Fluoro-elastomer Rubber | -20°C (-4°F) | 200°C (392°F) |
| EPR EPDM | Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM® | Ethylene Propylene Copolymer Ethylene Propylene Terpolymer | -50°C (-58°F) | 120°C (248°F) |
| FVMQ | Silastic 1S®, FSE® | Fluorosilicone Rubber | -65°C (-85°F) | 170°C (338°F) |
| FFKM | Perlast®, Kalrez®, Chemraz®, Kaflon® | Perfluoroelastomer | -25°C (-13°F) | 300°C (572°F) |